Steel Taping Machine
Detailed Information
Application:
This cable taping line is designed to apply a helical layer of copper or aluminum wire over a cable core. The final product produced by this wire taping machine is, mainly low voltage cable, used to connect consumer low voltage system by the power utility, where the phase conductor is the central aluminum conductor and the neutral conductor is the wire layer. The final product can also be a medium voltage cable and the copper wires are the cable shield.
Electric Control System：
This cable taping line is designed to apply a helical layer of copper or aluminum wire over a cable core. The final product produced by this wire taping machine is, mainly low voltage cable, used to connect consumer low voltage system by the power utility, where the phase conductor is the central aluminum conductor and the neutral conductor is the wire layer. The final product can also be a medium voltage cable and the copper wires are the cable shield.
Technical Information:
| Model | 600/2 | 800/2 |
|---|---|---|
| Cable Diameter Range | 20mm to 160mm | 60mm to 160mm |
| Taping overlap | 0-50% | 0-50% |
| Rotate speed | 500r/min | 500r/min |
| Taping Pitch | 9-160mm | 9-160mm |
| Taping Tension | 2.5-15daN | 2.5-15daN |
| Motor | 7.5kw | 7.5kw |
| Material of Tape | Water proof tape, copper tape, buffering tape, plastic tape ect. |
Line Composed by following items:
- Pay off
- Section to section device
- Taping machine
- Meter counter
- Belt Caterpillar
- Take-up
- Electrical Control System
Machine Details
APPLICATION
For cable extrude or insulation, mainly used for Automotive Wire, Building Wire, Power Cables extrusion
APPLICATION MATERIAL
PVC,PE, LSZH (Low Smoke Zero Halogen)
EXTRUSION TYPE
Single Layer, Double Layer,Three Layer,Double+Strip
SUITABLE DIA. OF WIRE
1.5-7.0MM
Video of Working Process: